Carbide Drill(10mm) - List of Manufacturers, Suppliers, Companies and Products

IT8 grade hole precision carbide drill for single-pass machining of castings! 'BJGF Drill'

"Drill bit" + "4 special reamer blades" achieves excellent machining precision.

The BJGF drill consists of a drill bit and four vanishing reamer blades. It achieves "high-precision machining" through high rigidity and multi-blade reamer design, "excellent surface roughness" due to superior cooling and chip removal with a back jet coolant supply, and "extended lifespan" through the use of multi-layer coatings, enabling one-pass finishing of cast workpieces.

Company：富士精工
Price：Other

drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Super hard drill | Replaceable cutting edge | 'HT 800 WP'

The "HT 800 WP" is a replaceable tip drill developed by a German global manufacturer with over 125 years of history, capable of processing holes up to Φ40.

The 'HT 800 WP' accommodates hole machining up to a maximum diameter of Φ40 with standard products, offering a variety of inserts and holders that support machining depths from 1xD to 10xD, tailored to the workpiece material. The inserts feature a special finish on the cutting edge, providing excellent wear resistance. The holders are designed with a size increment of 0.5mm, ensuring a robust design with high rigidity. The unique groove shape allows for optimal chip evacuation even in deep hole machining. By incorporating a coolant duct on the groove heel side, effective coolant supply to the cutting edge is made possible. *For more details, please refer to the cutting conditions table in the product catalog or feel free to contact us.

Company：グーリングジャパン
Price：Other

drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Processing example: MC Nylon Zero Valley Fiber

With the super hard drill "Zero Bari Drill," you can drill through soft and easily meltable MC nylon without any burrs!

This is a case of perforating MC nylon using the ultra-hard drill "Zero Buri Fiber." MC nylon is prone to melting, and even with the zero burr drill (GK-HAZ) designed for aluminum and resin, fine burrs were generated. However, with the new product Zero Buri Fiber, there are truly zero burrs!! It is now possible to perforate even more cleanly and without burrs than before!! Material being processed: MC nylon Drill used: Zero Buri Fiber Model number: GK-HFBZ Although it has a special shape, it can also be re-sharpened, contributing to cost reduction for our customers. Additionally, while the Zero Buri Fiber was developed for CFRTP, it is also ideal for softer resins. Please give it a try.

Company：ギケン
Price：Less than 10,000 yen

drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[ISA Coat Application Example] Drill Hole Machining

The material being machined is S45C! Here is a case where hole processing of 1071 was performed, resulting in the ability for continuous processing.

We would like to introduce a case study of the application of ISA coating in drilling hole processing. The cutting samples used were carbide drills with a diameter of 8.0 mm and oil holes. After processing 500 holes, the product from Company A (AlCrN-based coating) showed wear on the margin, while the product from Company B (AlCrN-based two-layer coating) exhibited minor defects on the margin and welding in the thinning area. The ISA coating processed 1071 holes and resulted in continued processability. 【Processing Conditions】 ■ Work material: S45C ■ Vc = 100 m/min ■ f = 0.18 mm/rev ■ Hole depth: 40 mm (blind hole) ■ Wet (water-soluble coolant) *For more details, please download the PDF or feel free to contact us.

Company：ノダキ本社
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

G7 Drill Series: Carbide Drill for One-Pass Machining at IT7 Level

IT7 grade one-shot machining carbide drill series!

The G7 drill series consists of a drill bit and a special reamer. By separating each groove, it allows the chips generated from the cutting edge to be discharged separately, eliminating chip jamming. The reamer features a special blade shape, achieving one-pass machining at IT7 level. The lineup includes the G7X drill for solid holes, the G7T drill for cast holes, and the Y7 drill as a high-feed version of the G7 drill.

Company：富士精工
Price：10,000 yen-100,000 yen

drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Super hard/high-speed steel stepped half-moon

For precision drill and precision pin manufacturing, please leave it to us!

Our company responds to the needs of customers who are unable to find suppliers for ultra-small pins (φ0.03 and above), ultra-short pins (1.0mm or less), cut pins, pins with a medium flange, long shank drills (with a long shank), and reamer long drills (with a long cutting length), as well as small diameter drills, small diameter precision pins, and small diameter punches. We also manufacture and sell carbide/high-speed steel drills (standard and custom), stepped drills, flat drills, half-moon drills, end mills, reamers, precision pins, guide pins, positioning pins, cut pins, pin gauges, small diameter punches, and irregular punches. 【Lineup】 ■ Drill reamer centered drill ■ Precision pins and small diameter punches ■ Special tools and dedicated tools ■ Pin gauges

Company：精工ドリル
Price：Other

drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Latest! Special fine-diameter ultra-hard drill! Zero burr for resin, CFRP, and UD materials!

"Zero Barrier fiber" can now be manufactured in non-standard thin diameters from φ1.0 and above!! A deburring drill specifically for resin, carbon fiber CFRP, CFRTP, and UD materials!

We are pleased to announce that our popular product, Zero Buri Fiber, is now available in a non-standard size starting from φ1.0! Previously, production began at φ3.0, but we have now eliminated burrs effectively using a fine-diameter carbide drill of φ1.0, allowing us to sell it as a special item! As you can see in the attached photo, even at a magnification of 50x, it is clear that the holes are cleanly drilled without any burrs. Please take a look at the comparisons with other companies. ▶ Usage: Zero Buri: GK-HFBZ Special Item ▶ Material being processed: PP ▶ Thickness: 5mm ▶ Cutting conditions: S=3350rpm, F=250mm/min ▶ Surface treatment: Non-coated ▶ Photo magnification: 50x ▶ Target materials: PP, MC Nylon, Duracon, PVC, resin, CFRTP, GFRTP, dedicated to UD materials Zero Buri Fiber can also be used for drilling with a drill press, so please take this opportunity to try it out. With just one Zero Buri, you can achieve such clean drilling without burrs.

Company：ギケン
Price：Other

Resin processing machine
Drill press
Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Super Hard Drill] Zero Burr with No Burrs Produced <Example: Pure Aluminum A1050>

[Aluminum Processing Case] The processes of drilling pilot holes, centering, and reaming can be done without burrs using a single carbide drill "Zero Buri"! [Case Collection Available]

We would like to introduce examples of zero-burr processing that our company has conducted. With our innovative hybrid drill that produces "no burrs," we achieve cost reduction through a reduction in the number of processes. 【Processing Examples】 ■ Tool Used: Step Zero Burr X for Aluminum and Resin ■ Model Number: GK-HAZX DLC ■ Material Being Processed: Pure Aluminum A1050 ■ Cutting Conditions: S=3350 F=250 ■ One-shot processing without centering or reaming ■ Pure aluminum, used for items like one-yen coins, can be drilled without burrs even with highly ductile materials. *For more details, please refer to the PDF document or feel free to contact us!

Company：ギケン
Price：Other

Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Carbide Drill(10mm) - List of Manufacturers, Suppliers, Companies and Products

Carbide Drill Product List